Item # S4S-DT, Model "SS" Series Turbocharged Mitsubishi Diesel Engine On Central Diesel, Inc.

Central Diesel, Inc.
4600 Deepwater Terminal Rd.
Richmond, VA 23234

Email:
cdioffices@centraldieselinc.com
sales@centraldieselinc.com
parts@centraldieselinc.com
service@centraldieselinc.com

Toll Free: 800.598.9814
Phone: 804.275.3900
Fax: 804.275.2274

Print Back

Construction:

Ribbed thin-wall cast iron crankcase for added strength and durability
Internal crankcase breather for reduced emissions
Extra large bearing surfaces for low bearing loads and long life

Unit of Measure

Specifications | Power Unit | Generator | Lubrication | Fuel and Combustion Systems | Mounting | Cooling | Electrical System | Governing | Drives

Specifications

Brands	N/A Mitsubishi
Engine Cycle	N/A 4-Stroke
Cooling System	N/A Water-Cooled
Engine Type	N/A Turbocharged Diesel
Bore	N/A 94 mm
Stroke	N/A 120 mm
Cylinders	N/A 4
Cylinder Arrangement	N/A Inline
Total Displacement	N/A 3.331 L
Combustion System	N/A Direct Injection
Dry Weight	N/A 250 kg551 lb
Electric Starting System Voltage	N/A 12 V
Fuel Oil	N/A Diesel Fuel Oil (ASTM No. 2-D)
Emission Standards	N/A Tier3
Oil Capacity	N/A 2.64 gal10 L

Power Unit

Continuous Output Power Rating at 1500 rpm	N/A 57.0 hp42.5 kW
Continuous Output Power Rating at 1800 rpm	N/A 67.0 hp50.0 kW
Continuous Output Power Rating at 2000 rpm	N/A 72.4 hp54.0 kW
Continuous Output Power Rating at 2200 rpm	N/A 76.7 hp57.2 kW
Continuous Output Power Rating at 2500 rpm	N/A 83.1 hp62.0 kW

Generator

Prime Power Rating Output at 60 Hz and at 1800 rpm	N/A 57.3 hp42.7 kW
Stand-by Rating Output at 60 Hz and at 1800 rpm	N/A 60.3 hp45.0 kW

Lubrication

Lubrication

Designed to run at up to 25 degrees of inclination and includes a full flow spin-on cartridge filter
Forced circulation by trochoid gear pump

Fuel and Combustion Systems

Fuel and Combustion Systems

Bosch style fuel injection pump

Mounting

Mounting

Standard crankcase side mounting pads for flexible mounting arrangements
Rear engine support available from side mounting pads on SAE 3 housing

Cooling

Cooling

Forced circulation by centrifugal pump
Cooling packages available for ambient temperatures up to 108 ºF (42 ºC)
Cooling Fan (Std. Eqt.) : Variable Speed (VS) - Suction
Cooling Fan (Std. Eqt.) : Generator Drive (GD) - Pusher

Electrical System

Starter Voltage	N/A 12 V
Starter Power	N/A 2.2 kW
Alternator Voltage	N/A 12 V
Alternator Power with Integral Regulator	N/A 50 A
Glow Plug Voltage	N/A 12 V
Switch	N/A High Water Temperature Low Oil Pressure
Stop Solenoid	N/A 12 V, energized to run (ETR) solenoid

Governing

Governing

Mechanical governing is provided for either variable or constant speeds

Drives

Drives

SAE 3 flywheel housing and 11.5 in flywheel (GD and VS models)
Rotation direction: counter-clockwise, facing the flywheel
Side PTO drives are available for mounting at the gear end