Construction:
  • Ribbed thin-wall cast iron crankcase for added strength and durability
  • Internal crankcase breather for reduced emissions
  • Extra large bearing surfaces for low bearing loads and long life
Unit of Measure

Specifications

Brand

N/A Mitsubishi

Engine Cycle

N/A 4-Stroke

Cooling System

N/A Water-Cooled

Engine Type

N/A Natural-Aspirated Diesel

Bore

N/A 76 mm

Stroke

N/A 70 mm

Cylinders

N/A 3

Cylinder Arrangement

N/A Inline

Total Displacement

N/A 0.952 L

Combustion System

N/A Swirl Chamber - Indirect Injection (IDI)

Dry Weight

N/A 75 kg165.3 lb

Electric Starting System Voltage

N/A 12 V

Fuel Oil

N/A Diesel Fuel Oil (ASTM No. 2-D)

Emission Standards

N/A Tier4Fi

Oil Capacity

N/A 0.95 gal3.6 L

Power Unit

Output Power Rating at 1500 rpm

N/A 9.4 hp7.0 kW

Output Power Rating at 1800 rpm

N/A 12.2 hp9.1 kW

Output Power Rating at 2000 rpm

N/A 13.7 hp10.2 kW

Output Power Rating at 2200 rpm

N/A 15.0 hp11.2 kW

Output Power Rating at 2500 rpm

N/A 17.0 hp12.7 kW

Output Power Rating at 3000 rpm

N/A 20.4 hp15.2 kW

Output Power Rating at 3600 rpm

N/A 23.7 hp17.7 kW

Generator

Prime Power Rating Output at 60 Hz and at 1800 rpm

N/A 10.9 hp8.0 kW

Stand-by Rating Output at 60 Hz and at 1800 rpm

N/A 12.5 hp9.2 kW

Lubrication

Lubrication

N/A
  • Designed to run at 30 degrees of inclination and includes a full flow spin-on cartridge filter
  • Forced circulation by gear pump

Fuel and Combustion Systems

Fuel and Combustion Systems

N/A
  • Bosch style fuel injection pump
  • Indirect injection combustion system for low noise and emissions
  • Cylinder head is a prechamber design to increase efficiency of combustion

Mounting

Mounting

N/A
  • Standard crankcase side mounting pads for flexible mounting arrangements
  • Rear engine support available from side mounting pads on SAE 5 housing

Cooling

Cooling

N/A
  • Forced coolant circulation by centrifugal pump
  • Cooling packages available for ambient temperatures up to 108 ºF (42 ºC)
  • Cooling Fan (Std. Eqt.) : Variable Speed (VS) - Suction
  • Cooling Fan (Std. Eqt.) : Generator Drive (GD) - Pusher

Electrical System

Starter Voltage

N/A 12 V

Starter Power

N/A 1.7 kW

Alternator Voltage

N/A 12 V

Alternator Power with Integral Regulator

N/A 40 A

Glow Plug Voltage

N/A 12 V

Switch

N/A High Water Temperature Low Oil Pressure

Stop Solenoid

N/A 12 V integrated ETR stop solenoid eliminates external linkage

Governing

Governing

N/A Mechanical centrifugal governing is provided for either variable or constant speeds

Drives

Drives

N/A
  • SAE 5 flywheel housing and 6.5 in SAE flywheel (GD and VS-1 models)
  • Flat face flywheel (VS-2 models)
  • Rotation direction: counter-clockwise, facing the flywheel end
  • Side PTO drives are available for mounting at the gear end